Frequently Asked Questions - YILMAZ MACHINE

Frequently Asked Questions

Frequently Asked Questions

The machine can work double station.

Please check the document   cnc lubrication

The Machine has 11 tools
  • 1 saw
  • 2 milling tool
  • 2 cleaning tool for white profile
  • 2 cleaning tool for lamine profile
  • 2 inside cleaning tools
  • 2 radius cleaning tools

  1. Firs of all you should connect the machine computer to the internet
  2. İnstall the TeamViewer program on machine's computer
  3. Star the Team Viewer Program
  4. Inform the ID and Password to the Technicial Service

  1. First of all, pull an ethernet cable from your modem to the side of the machine.
  2. Open the machine's electric panel
  3. Connect the ethernet cable to the HUB
  4. Configure IP adress on your computer

A saw with a maximum diameter of 350 mm can be used on the machine.

The processing speed of the machine; spindle : 20000 RPM Axis: X-axis:71 m/min, Y-axis: 60 m/min, Z-axis: 18m/min, A-axis: 100°/sec C-axis 40°/sec

X axis: 7120mm Y Axis: 350mm Z Axis: 200mm C Axis +92' / -92' A Axis: +110'/-110'

75% (minimum) pure water 10% Ethylene glycol + rust inhibitor chemical or ARTIC-FLU-5 (Product code: H2161H0022) should be used.

The machine can process all operation on the machine with 7 tools.
  1. Water Slot
  2. Barel
  3. Handling
  4. Marking
  5. Lock Channel
  6. Cutting
  7. etc

  1. The clamp must be close
  2. Machine cover must be close?
  3. Check the cover switch.
  4. Check the air presure. It must be 6 Bar
  5. Check the cutting speed
  6. Check the hydro pnomatic sylinder oil.

DIDN`T FIND WHAT YOU WERE LOOKİNG FOR?

'

Sign up for our e-newsletter!