STANDART ACCESORIES

OPTIONAL ACCESSORIES

GENERAL FEATURES

• Pencer Windows that are welded in the DK 540 welding line are moved to the SA 250 cooling unit from the center with the SA 260 robot to the CNC 608-610 machine and the corner cleaning process is carried out. The window with the corner cleaning process is moved by the SA 260 robot to the end of the table, the sensor in the output group sees the product and New window deburring cannot be done without this product.
• The SA 251 baffer station has been designed to speed up this process and to ensure that the operator does not need to go to the exit station until this area is full, and that the window is stored for 3 meters, not 1 window.
• After the finished product is transported to the output group with the SA 260 robot, the sensor sees the product, likewise it means the entrance of the SA 251 buffer station connected in parallel to this output group, there is a sensor that SA 251 perceives the product, 5 seconds after the sensor see the product, the vertical connected piston group is holding the product Moving in the Z axis direction, it goes to the inner corner of the window, and by moving in the Y axis, drags the window to the end point of the table, as in the entrance at the end point of the table, the object sees the product through the sensor sensor and stops and moves down on the Z axis, returning to the position it started.
• The operator can continue to weld until the 3 meter area is full, thus saving time. This process is repeated in every product that ends.